Frequency Response. The AT4040 low-noise circuitry is symmetrical and transformerless, resulting in exceptional transient response and clean output signals for transparent reproduction of even the most troublesome of instruments and sound effects. What is SPL? Color: Matte Grey Blue; Weight: 0.62 lbs. 80 … What is XLR? Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D. Included Accessories: H85 … Low Cut Filter: 160Hz (-6dB/octave). Externally-polarized (DC bias) condenser. This means, you … switch that permits choice of flat response or 80 Hz low-frequency roll-off. However, with AT4040 this is almost unnoticeable and that I cannot say about other LDCs. The Audio-Technica AT4040 is specified. Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics; Externally polarized … The response of a system can be partitioned into both the transient response and the steady state response. AT4040 Specifications. The steady state response of a system for an input sinusoidal signal is known as the frequency response. Frequency Response: 20Hz – 20kHz; Polar Pattern: Cardioid. Pads:-20dB. Weight shall be 360 grams (12.7 oz). Frequency Response: 20-20,000 Hz. Signal to Noise Ratio: 82 dB, 1 kHz at 1 Pa. Phantom Power Requirements: 48V DC, 4.2 mA … Cardioid. ; 155 dB SPL, with 10 dB pad (nominal) Dynamic Range : 133 dB, 1 kHz at Max SPL. Max SPL: 136dB (156dB w/Pad). Self Noise: 13dB (A weighted). In this chapter, we will focus only on the steady state response. Low Frequency Roll Off: 80 Hz, 12 dB/octave. Open Circuit Sensitivity-32 dB (25.1 mV) re 1V at 1 Pa. Impedance: 100 ohms. Impedance: 200 Ohms. Low Frequency Roll-Off. Sibilance is mainly caused by harmonic distortions, whereas in this case we get only an accentuation mainly due to a specific frequency response. Switches:-20dB pad. Element. The microphone shall include a shock mount, a dust cover and a protective carrying case. The microphone shall be 170.0 mm (6.69") long and have a maximum body diameter of 53.4 mm (2.10"). We can find the transient response by using Fourier integrals. Polar Pattern. AT4040: AT2035: Impedance 100 ohms (Better signal control for studio) 120 ohms: Polar Patterns Cardioid (Standard recording pattern; captures sound from the front only) Cardioid: Frequency Response: 20Hz – 20kHZ (Professional range of high and low pitches) 20Hz – 20kHz: Dimensions: 6.69” x 2.10” 6.69” x 2.05” (Slightly smaller, maybe easier to use) Weight: 0.79lbs (Weighs less; may be easier … 20-20,000 Hz. The frequency response is fine, though it has a slight bulge peaking at around 6.5k, which may result to accentuation of “s” sounds aka sibilance. Audio-Technica AT4040 Side-Address Cardioid Condenser Microphone, 20 Hz - 20 kHz Frequency Response, 100 Ohms Impedance The Audio-Technica AT4040 is a large diaphragm, cardioid capacitor microphone designed for use in the most demanding recording applicat. Frequency Response 20-20,000 Hz 20-18,000 Hz 20-18,000 Hz 20-18,000 Hz 30-20,000 Hz 20-20,000 Hz Open Circuit Sensitivity -34 dB (19.9 mV) re 1V at 1 Pa -42 dB (7.9 mV), re 1V at 1 Pa -35 dB (17.7 mV) dB re 1V at 1 Pa -36 dB (15.8 mV), re 1V at 1 Pa -32 dB (25.1 mV) re 1V at 1 Pa -32 dB (25.1 mV) re 1V at 1 Pa Impedence 200 ohms 100 ohms 250 ohms 100 ohms 100 ohms 100 ohms Maximum Input Sound … Microphone Connector: XLR. AT4040 SPECIFICATIONS† ELEMENT Externally-polarized (DC bias) condenser POLAR PATTERN Cardioid FREQUENCY RESPONSE 20-20,000 Hz LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY –32 dB (25.1 mV) re 1V at 1 Pa* IMPEDANCE 100 ohms MAXIMUM INPUT SOUND LEVEL 145 dB SPL, 1 kHz at 1% T.H.D. Signal to noise ratio: 81dB (A weighted).